Custom Magnets the Catalogs Won’t Have
BJA Magnetics is headquartered in Leominster, MA, and we do what we know best: take a print, understand what the part needs to do, and fabricate a magnet that fits both the drawing and the application. Our magnet fabrication services for Mississauga, Canada cover everything from single prototypes to full production runs. You bring the specs, while we bring the process.
What does magnet fabrication actually involve?
It’s the process of turning raw magnet stock into a finished part that matches your print. That can mean slicing, surface grinding, wire EDM, drilling, coating, and magnetizing – sometimes all of the above, depending on the geometry.
Which materials do you work with?
At BJA Magnetics, we work with neodymium, samarium cobalt, ferrite, alnico, and flexible magnets. Each one behaves differently under tooling, so we build the process around the material from the first step, not the last.
How tight can tolerances get?
Tight, but it depends on the material and the geometry. We’ll tell you exactly what’s achievable in terms of tolerances before we start, not after you’ve paid for scrap.
Do you handle small orders?
We do. Prototypes and low-volume runs are a regular part of our work. They’re also the smartest way to validate a design before you commit to full production.
What We Actually Do When We Get Your Drawing
Rare earth magnets are hard, brittle, and unforgiving. They don’t machine like steel – they chip, crack at sharp corners, and need diamond tooling throughout. That’s why the first thing we do when a drawing comes in is read it carefully.
We’ve caught problems at the review stage that would have caused real damage later – a radius that’s just slightly too tight, a tolerance that doesn’t match what the magnet will actually be asked to do. For engineering teams sourcing magnet fabrication for Mississauga, Canada applications, that early conversation is usually where the project gets on the right track.
Have a drawing ready? Contact BJA Magnetics today for a quote.
Matching Material & Finish to the Real Environment
Grade selection isn’t just a spec sheet decision. A standard neodymium magnet fits many applications…until it doesn’t. If operating temperatures run high, samarium cobalt holds its output where neodymium starts to lose ground. And if the part lives in a humid or chemically aggressive environment, the wrong coating will let it down faster than the wrong grade will.
We touch on these questions because we’ve seen what happens when they’re skipped. If you’re a Canada area engineer or manufacturer working through magnet fabrication questions like material and finish tradeoffs, we’re glad to walk through the options with you – magnetization direction included – before anything moves into production.

Start Your Next Project With BJA Magnetics
We’ve been doing magnet fabrication long enough to know that the jobs that go smoothest are the ones where we get involved early. Whether your facility is near Mississauga, Canada, or on the other side of the country, sending us your drawing sooner rather than later saves time, money, and a lot of back-and-forth. Contact BJA Magnetics and let’s get started!
Custom Magnets the Catalogs Won’t Have